 |
2800
Twin-Drives
by M.A.C.K.
This unit allows a single electric motor or gas engine
(1.5 cu. in displacement max.) to turn two propellers ---
counter-rotating.
FOR HEAVY DUTY USE. The unit is made of anodized aluminum,
with high impact machined nylon gears set at a 2 to 1 reduction from
input shaft to output shafts. It's quiet running and has low
torque loss. It can be run as a "V"-drive with the motor
or engine located between the output shafts. Available in three
shaft spacings: 3, 4 and 5 inch. Shafts are 3/16"
diameter and are 1-1/8" above the base of the unit. |
#2803
3" spacing 4-3/4" L x
1-1/8" W x 2-1/4" H Wt: 7 oz. $122.25
#2804 4" spacing
5-3/4" L x 1-1/8" W x 2-1/4" H
Wt: 9 oz. $148.00
#2805 5" spacing
6-3/4" L x 1-1/8" W x 2-1/4" H
Wt: 10 oz. $161.50 |
 |
7002
& 7003 Motor Mounts by
M.A.C.K.
Anodized aluminum motor mounts with mounting hardware
for all car and marine motors.
#7002 - For all 360 & 380 size
motors $5.25
#7003 -
For all 540 & 550 size motors $5.50
|
